- External control element for wireless alarm system SP310
- Functions: Arm / Disarm / SOS Alarm
- Live overview of the base
- Up to 8 RFID chips can be integrated
- 12 volt connection
- Wall bracket incl. tamper protection
- Rolling code
- 2-way communication
- Frequency: 868MHz
- Batteries: requires 3x AAA batteries (not included)
- Dimensions: approx. 14 x 10 x 2.5cm L/W/D
- Scope of delivery: 1x keypad, 2x RFID chips, wall bracket
incl. 19% VAT
Description
Radio control element for the base of the Alarmsseries SP310 from Safe2Home.
With the Safe2Home external control panel, you can easily arm and disarm your alarm system using a key code or RFID chip.
To activate the RFID field press the “Back button” (bottom left) for 3 seconds.
You can view the current status of your alarm system on the large LCD display.
The external control panel can be operated with 3x AAA batteries for approx. 1 year.
In addition, a 12 volt power input is available.
When the battery level gets low, you will receive a message.
Multiple users can also be programmed in.
Watch the keypad installation video:
https://youtu.be/LgNa5-HLSOI
Rolling code
Each contact/sensor has a rolling code. This means that as soon as a radio signal (e.g. window opening) is emitted, the sensor generates a new code so that it cannot be intercepted and used by unauthorized persons.
Example: In the past, it was possible to intercept the radio signal of the remote control from a car and thus open the vehicle; this is not possible with the SP310.
2-way communication:
The SP310 base has 2-way communication.
This means that the sensors and base communicate with each other (via radio). A query of the radio signal and the battery status of the sensor is carried out automatically every 5 minutes. If, for example, a sensor does not send a signal (e.g. because it is switched off due to an empty battery), the base unit immediately checks for the missing signal and sends a message via the app and displays this on the base unit.
In addition, you can manually query the radio signal and battery status via the app, or set the query frequency of 5 minutes as required.
Further information and help:
https://safe2home.de/downloads-anleitungen
https://safe2home.de/installationsvideos
https://safe2home.de/faq
