- Indoor siren for wireless alarm system SP310
- 230V socket outlet
- Status LED indicator („Armed / Unarmed light“)
- „Arm / Disarm“ signal tone
- Repeater function
- Loud signal tone (90dB) and red warning light
- Sabotage protection
- Rolling code
- 2-way communication
- Frequency: 868MHz
- Dimensions: approx. 7 x 7 x 4cm (L/W/H)
- Scope of delivery: 1x siren, socket adapter, instructions
incl. 19% VAT
Description
The indoor siren in a modern design forms the basis of the SP310 alarm series from Safe2Home.
Rugged and elegant plastic housing use.
The siren generates a loud signal tone (90dB) and warning light in the event of a break-in in the building/house.
The indoor siren can be used in conjunction with the Safe2Home SP310 series. It requires a standard 230 volt socket for operation.
The siren has no additional battery. All settings made are saved. The indoor siren can be removed from the socket at any time and used at another location. (The settings are retained).
The product can be used as a single siren and connected directly to your base.
We recommend that you attach the indoor siren centrally between the base and the sensor. This allows you to amplify the signal and increase the wireless range. (As described in the video)
The repeater mode of the indoor siren SP310 starts automatically.
A sensor will only connect to the indoor siren if there is no radio signal to the base at all.
Repeater function
The repeater function is used to extend the range of the base station and serves as a range extender for the Safe2Home accessory. This is an automatic default setting and does NOT need to be adjusted manually.
Rolling code
Each accessory of the SP310 has a rolling code. This means that as soon as a radio signal (e.g. window opening) is emitted, the sensor generates a new code so that it cannot be intercepted and used by unauthorized persons.
Example: In the past, it was possible to intercept the radio signal of the remote control from a car and thus open the vehicle; this is not possible with the SP310.
2-way communication:
The SP310 base has 2-way communication.
This means that the sensors and base communicate with each other (via radio). A query of the sensor's radio signal is automatically carried out every 5 minutes. If, for example, a sensor does not send a signal, the base unit checks the missing signal directly, sends a message via the app and displays this on the base unit. In addition, you can manually query the radio signal via the app or set the query frequency of 5 minutes as required. Full control over every contact/sensor. Individual settings for each contact. Another advantage of the SP310 is that each contact has its „own zone“. This means that each contact can be renamed individually via the app. You have a full overview of where which detector has been installed.
In addition, you can manually query the radio signal via the app or set the query frequency of 5 minutes as required.
Further information and help:
https://safe2home.de/downloads-anleitungen
https://safe2home.de/installationsvideos
https://safe2home.de/faq
