- Detailed description of the sensor can be found below
- Status LED display („Armed / Disarmed light“) / - „Armed / Disarmed“ signal tone
- Frequency: 433MHz /- Tamper protection
- Repeater function
- Loud signal tone (90dB) and red warning light
incl. 19% VAT
Description
The indoor siren in a modern design for the basis of the SP110/SP210/SA100/OTTO alarm series from Safe2Home.
Rugged and elegant plastic housing use.
The siren generates a loud signal tone (90dB) and warning light in the event of a break-in in the building/house.
The indoor siren can be used in conjunction with the Safe2Home series SP110/SP210/SA100/OTTO. It requires a standard 230 volt socket for operation.
The siren has no additional battery. All settings made are saved. The indoor siren can be removed from the socket at any time and used at another location. (The settings are retained).
The product can be used as a single siren and connected directly to your base.
We recommend that you attach the indoor siren centrally between the base and the sensor. This allows you to amplify the signal and increase the wireless range. (As described in the video)
The repeater mode of the indoor siren starts automatically.
A sensor will only connect to the indoor siren if there is no radio signal to the base at all.
Repeater function
The repeater function is used to extend the range of the base and serves as a range extender for the Safe2Home accessory. This is an automatic default setting and does NOT need to be adjusted manually.
More information:
https://safe2home.de/installationsvideos
https://safe2home.de/downloads/ (Operating instructions for technical data)
https://safe2home.de/faq
