Description
Line motion detector from Safe2Home.
The detector has an integrated infrared sensor.
The motion detector works as a kind of „curtain“ with a range of up to approx. 9m and a height of up to approx. 4m. This allows you to cover an entire patio front or use the detector as an automatic doorbell (zone type).
If the motion detector detects movement, the sensor immediately sends an alarm signal to the base and an alarm/intrusion alarm is triggered. In the event of an alarm, an SMS/call/wifi notification is immediately sent to your smartphone.
The motion detector should be mounted/screwed at a height of 1 - 2.5m.
It is important that the sensor does not point directly at a window pane or is mounted above a heat source (fireplace, heater, etc.).
If a sensor is out of range, the sensor can be coupled directly with the repeater mode of the outdoor or indoor siren. (You can find an installation video on https://youtu.be/tFJjHZTo-40) The process is identical to that shown in the video.
Different zone types can be set
You can set different zone types for this sensor in the basic menu or via the app
The most important zone types for everyday use:
Burglary:
Alarm is triggered directly in the „armed state“
Derasure:
Alarm is activated in the „armed state“ after the set
Delay time triggered (recommended)
Fire / Gas:
Alarm is always triggered (in armed and disarmed state)
Deact. :
No alarm is triggered (sensor is deactivated)
Sharp / Blurred:
When a sensor is triggered, the system is armed/disarmed. For example, for a lock cylinder.
Bell:
The sensor emits a "ding-dong" sound when sensors are triggered.
No alarm is triggered. You will still receive a push message.
Further information and help:
https://safe2home.de/downloads-anleitungen
https://safe2home.de/installationsvideos
https://safe2home.de/faq
