- Detailed description of the sensor can be found below
- Motion detection: approx. 6 – 8m /- Detection angle: 110°
- The motion detector reacts from 25kg /- Recommended mounting height: 2 – 2.5m
- Dimensions: approx. 13cm x 6cm x 4.5cm /- Batteries: 2x AA (not included)
- Sabotage protection /- Frequency: 433MHz
incl. 19% VAT
Description
Motion detector from Safe2Home.
The motion detector monitors the room and triggers an alarm when movement is detected. An alarm is only triggered from a weight of approx. 25 kg.
The detector has an integrated infrared sensor. Animal immune through 2-fold sensor technology. Small animals are not detected.
If the motion detector detects movement, the sensor immediately sends an alarm signal to the base and an alarm / burglar alarm is triggered. In the event of an alarm, an SMS/call/wifi notification is immediately sent to your smartphone.
You will also be informed of a low battery status via an app notification or message on the base display.
The motion detector should be mounted/screwed at a height of 2 - 2.5m.
It is important that the sensor does not point directly at a window pane or is mounted above a heat source (fireplace, heater, etc.).
The motion detector reacts from 25kg If you have a pet, e.g. a cat, you should make sure that it has no way of directly blocking the detection area.
If a sensor is out of range, the sensor can be paired directly with the repeater mode of the outdoor or indoor siren (you can find an installation video on https://www.youtube.com/watch?v=tFJjHZTo-40 . The process is identical to that shown in the video.
Different zone types adjustable
You can set different zone types for this sensor in the basic menu or via the app
The most important zone types for everyday use:
Burglary:
Alarm is triggered directly in the „armed state“
Derasure:
Alarm is activated in the „armed state“ after the set
Delay time triggered (recommended)
Fire / Gas:
Alarm is always triggered (in armed and disarmed state)
Deact. :
No alarm is triggered (sensor is deactivated)
Sharp / Blurred:
When a sensor is triggered, the system is armed/disarmed. For example, for a lock cylinder.
Bell:
The sensor emits a "ding-dong" sound when sensors are triggered.
No alarm is triggered. You will still receive a push message.
