- Remote control for alarm system SP310
- 4 function keys
- Range: approx. 15 - 20m
- Rolling code
- 2-way communication
- Frequency: 868MHz
- Battery: 1 x CR2032 (included)
- Dimensions: Remote control: 6 x 3.5 x 1cm L/W/D
- Scope of delivery: 1x remote control, battery included
incl. 19% VAT
Description
Wireless remote control for the base of the SP310 alarm series from Safe2Home.
For a single-family home, it is possible to disarm the system in front of the front door. The range is approx. 15 – 20m (approx. 4 – 8m further with the antenna extended). Depending on the nature of the house (e.g. several walls/ceilings), the range may vary.
Button functions:
The buttons on the wireless remote control can be switched on and off via the app or via the base. This means you can switch off three buttons, for example, and only leave the “Disarm” button active.
If you want to change the battery, remove the „CE sticker“ on the back and loosen the screw.
Rolling code
Each contact/sensor has a rolling code. This means that as soon as a radio signal (e.g. window opening) is emitted, the sensor generates a new code so that it cannot be intercepted and used by unauthorized persons.
Example: In the past, it was possible to intercept the radio signal of the remote control from a car and thus open the vehicle; this is not possible with the SP310.
2-way communication:
The SP310 base has 2-way communication.
This means that the sensors and base communicate with each other (via radio). A query of the radio signal and the battery status of the remote control is carried out automatically every 5 minutes. If, for example, the remote control does not send a signal (e.g. because it is switched off due to an empty battery), the base unit immediately checks for the missing signal and sends a message via the app and displays this on the base unit.
In addition, you can manually query the radio signal and battery status via the app, or set the query frequency of 5 minutes as required.
