- Window/Türsensor für Funk alarm system SP110 / SP210 / SA100 / OTTO
- Monitors the opening and closing of your windows and doors
- Individual color selection possible (RAL colors)
- Different zone types adjustable
- Sabotage protection
- Frequency: 433MHz
- Batteries: 2x AAA (not included)
- Dimensions: Sensor: approx. 7cm x 3.6cm x 2.2cm / Magnet: approx. 5.5cm x 1.3 x 2.2cm
- Scope of delivery: 1x window / door sensor, adhesive pads, instructions
incl. 19% VAT
Description
from Safe2Home.
The sensor / contact monitors the opening and closing of your windows or doors and alerts you to break-ins.
If the magnetic contact is interrupted, the sensor immediately sends an alarm signal to the base and an alarm/intrusion alarm is triggered. In the event of an alarm, an SMS/call/wifi notification is immediately sent to your smartphone.
You will also be informed of a low battery status via an app notification or message on the base display.
The sensor can be attached to the window or door using the enclosed adhesive pad. You can also screw the sensor in place if required (not necessary in most cases).
Both the sensor and the magnet can be attached to the window frame/window leaf.
Make sure that the arrow markings on the sensor and magnet point towards each other.
The difference in height and width must not exceed 1.5 cm (up to this value, the contacts are still considered closed).
If the distance should be higher/wider, you can use the enclosed adhesive spacer pad.
If a sensor is out of ra nge, the sens or can be paired directly with the repeater mode of the outdo or or indoor siren. You can find an installation video on https://www.youtube.com/watch?v=tFJjHZTo-40
On request, window door conta cts ca n also be supplied in various RAL Colors.
Different zone types adjustable
You can set different zone types for this sensor in the basic menu or via the app
The most important zone types for everyday use:
Burglary:
Alarm is triggered directly in the „armed state“
Derasure:
Alarm is activated in the „armed state“ after the set
Delay time triggered (recommended)
Fire / Gas:
Alarm is always triggered (in armed and disarmed state)
Deact. :
No alarm is triggered (sensor is deactivated)
Sharp / Blurred:
When a sensor is triggered, the system is armed/disarmed. For example, for a lock cylinder.
Bell:
The sensor emits a "ding-dong" sound when sensors are triggered.
No alarm is triggered. You will still receive a push message.
