Description
Radio socket for the basis of the SP310 alarm series from Safe2Home.
You can connect up to 16 wireless sockets to the base of the alarm system.
The smart socket can be switched on and off via APP/keystroke.
Automatic switch-on at alarm is also possible. This switches on a floor lamp, for example.
The socket also has a timer function that can be used as a time switch clock for lamps. This allows you to switch the lights on automatically and simulate an inhabited house.
Rolling code
Each contact/sensor has a rolling code. This means that as soon as a radio signal (e.g. window opening) is emitted, the sensor generates a new code so that it cannot be intercepted and used by unauthorized persons.
Example: In the past, it was possible to intercept the radio signal of the remote control from a car and thus open the vehicle; this is not possible with the SP310.
2-way communication:
The SP310 base has 2-way communication.
This means that the radio-controlled socket and base communicate with each other (via radio). The radio signal is automatically queried every 5 minutes.
In addition, you can query the radio signal manually via the app or set the query frequency as required.
-
Full control over every contact/sensor.
Individual settings for each contact.
Another advantage of the SP310 is that each contact has its „own zone“.
This means that each contact can be renamed individually via the app. You have a full overview of where which detector, sensor or socket has been installed.
Further information and help:
https://safe2home.de/downloads-anleitungen
https://safe2home.de/installationsvideos
https://safe2home.de/faq
